Cellulose Fibre Pellets-CF 36P (India)

Cellulose Fibre Pellets – CF 36P (India)

Stabilizing Additive for Stone Matrix Asphalt (SMA)

 

1. Product Description

Cellulose Fibre Pellets – CF 36P are pelletized stabilizing additives manufactured from processed cellulose fibres. The product is specifically designed for use in Stone Matrix Asphalt (SMA) and other gap-graded asphalt mixes to control bitumen drain-down and enhance pavement durability.

The pellets disperse uniformly in the mix during production and form a reinforcing matrix within the bitumen, improving structural stability and performance.

 

2. Recommended Application

• Stone Matrix Asphalt (SMA)

• Gap-graded asphalt mixtures
• Heavy traffic roads
• Expressways and highways
• Airport pavements
• Urban roads with high load conditions

 

3. Dosage Recommendation

As per IRC SP:79, recommended dosage:

0.3% by total weight of asphalt mixture

(Actual dosage may vary depending on mix design and project specifications.)

 

4. Technical Properties

Parameter	Specification / Typical Value
Material Composition	Processed Cellulose Fibre
Form	Pelletised
Pellet Diameter	4 mm / 6 mm
Pellet Length	10–15 mm
Colour	Grey to Brown
Bulk Density	Approx. 450–650 kg/m³
Moisture Content	≤ 5%
Ash Content	≤ 20%
Oil Absorption Capacity	High (Acts as Drainage Inhibitor)
Solubility	Insoluble in water
Melting Behaviour	Disperses in hot mix (No melting)

Note: Exact values may vary slightly depending on batch and customer requirement.

 

5. Performance Benefits

• Controls bitumen drain-down in SMA mix

• Improves rut resistance
• Enhances crack resistance
• Increases durability of pavement
• Improves skid resistance
• Ensures uniform binder distribution
• Extends pavement service life

 

6. Compliance & Standards

• Recommended as stabilizing additive as per IRC SP:79

• Suitable for use in SMA mix designs as per Indian Road Specifications

 

7. Packaging

• 3 kg Bags

• 25 kg Bags
• 250 kg Jumbo Bags
• 500 kg Jumbo Bags

(Custom packaging available on request)

 

8. Storage & Handling

• Store in dry and ventilated area

• Protect from moisture and direct sunlight
• Keep bags sealed until use
• Shelf life: 12 months under recommended storage conditions

 

9. Safety Information

• Non-hazardous material

• Avoid inhalation of dust during handling
• Use protective gloves and mask while handling bulk quantities
• Refer to Material Safety Data Sheet (MSDS) for detailed safety information

 

10. Disclaimer The information provided in this Technical Data Sheet is based on current knowledge and practical experience. Performance may vary depending on mix design, site conditions, and application methods.

 

DPS – Deep Penetrating Sealer

Waterproofing & Concrete Preservation System

 

1. Product Description

DPS (Deep Penetrating Sealer) is an advanced inorganic, mineral-based penetrating treatment designed to waterproof and preserve concrete structures. It penetrates deep into the concrete substrate and reacts chemically with free lime and moisture to form insoluble crystalline structures within the pores and capillaries.

This process permanently densifies and seals concrete, protecting it from water ingress, chloride attack, chemicals, and environmental deterioration.

DPS is suitable for both new and existing concrete and provides long-term structural protection without forming a surface film.

 

2. Recommended Applications

• Industrial floors

• Parking structures
• Bridges & flyovers
• Marine structures
• Basements & foundations
• Water retaining structures
• Concrete roads & pavements
• Warehouses & factories
• Residential & commercial buildings

 

3. Technical Characteristics

Parameter	Specification / Typical Value
Appearance	Clear Liquid
Base	Inorganic Mineral Based
Odor	Odourless
Toxicity	Non-Toxic
Flammability	Non-Flammable
Solubility	Water Soluble
VOC Content	Nil / Very Low
Application Surface	Dry or Damp Concrete
Coating Type	Penetrating (Non-Film Forming)
Re-coating Requirement	Not Required (Permanent Treatment)

 

4. Performance Properties

• Deep penetration into concrete pores

• Permanent waterproofing protection
• Reduces chloride ion ingress
• Increases surface hardness
• Improves compressive strength over time
• Anti-carbonation protection
• Chemical resistance enhancement
• Reduces efflorescence
• Dust-proofing of concrete surfaces
• Enhances adhesion for coatings and finishes

 

5. Advantages

• Waterproofs and preserves concrete

• Protects against environmental damage (rain, salts, oils, chemicals)
• Permanent solution – no peeling or re-coating required
• Suitable for both old and new concrete
• Environmentally friendly
• Safe for use in enclosed environments
• Long shelf life

 

6. Application Method (General Guideline)

1. Surface must be clean and free from dust, oil, grease, and loose particles.

2. Apply DPS using low-pressure spray, roller, or brush.
3. Allow adequate penetration time.
4. Remove excess material if required.
5. Cure as per project specification.

(Note: Actual application method may vary based on project requirements.)

 

7. Coverage (Typical)

Approx. 4–6 m² per liter
(Depending on surface porosity and condition)

 

8. Packaging

• 20 L Can

• 50 L Drum
• 200 L Barrel
  (Custom packaging available on request)

 

9. Storage & Shelf Life

• Store in sealed containers

• Protect from extreme temperatures
• Shelf Life: 24 months under recommended storage conditions

 

10. Safety & Handling

• Non-toxic and safe to handle

• Avoid prolonged skin contact
• Use gloves and eye protection during application
• Refer to MSDS for detailed safety information

 

11. Disclaimer

All technical information is based on laboratory testing and practical experience. Performance may vary depending on concrete quality, surface preparation, and site conditions.